Outside Diameter:
Approximately .035" to 1.750"
Wall Thickness:
Capability range depends on diameter. Check with our sales office.
Tolerances:
Commercial tolerances per ASTM B251 or better.
Consult with our sales office for your application.
Alloys:
CDA 122 (DHP)
CDA 120 (DLP)
CDA 108 (LP)
CDA 103 (XLP)
CDA 706 (90-10 Cupro-Nickel)
Temper:
As required, from dead soft to full hard.
Can be specified by grain size, Rockwell hardness, or tensile strength.
We can advise you on specifying a temper, depending on your application.
Coils:
Level wound coils up to 7/8" O.D. bulk packed or on disposable reels.
Bunch, helical, or pancake coils. Spool wound tubing available on reels.
Straight Lengths:
Random mill lengths or cut to your finished length.
Depending on temper and packing requirements, up to 40ft. lengths available.
Short Cut Pieces:
Our high speed tubing saws can cut burr free pieces down to approximately .250" in length.
Small Diameter Tubing:
Outside diameters down to 0.035". Coils or cut to length for control or other applications.
Capillary/Restrictor Tubing:
Flow tested restrictor tubing in accordance with ASTM B360 and ASHRAE standards.
Shapes:
In addition to round tubing, we offer square, rectangular, figure 8, and many other shapes.
Packaging:
We will package tubing in accordance with your specifications, or will design special packaging for ease of handling and protection of the product.
Fabricated Parts:
Bends, flares, expanded and swaged ends, other configurations are available.
